Thick UV Glue for Rhinestone DIY – 25ml | Crystal & Bedazzle Adhesive

UV glue cures when it is exposed to UV light. If the glue layer is too thick, if too much pigment or glitter is mixed in, or if the UV light cannot fully reach the glue, curing may take longer or may not finish completely.

For best results, apply the glue in a thin, even layer and cure section by section. If you are working on a curved surface, cure the front first, then rotate the item and cure other angles.

Apply the glue slowly and avoid squeezing out too much at once. If you see small bubbles, you can use a toothpick or fine tip tool to gently move or pop them before curing.

For this thick glue, a small amount is usually enough to attach rhinestones or crystals. Using too much glue may create more bubbles and may also take longer to cure.

Store the glue tightly sealed in a cool, dry place away from sunlight and UV exposure. Keep the bottle closed when not in use.

UV glue may thicken, yellow, or become harder to cure after long storage. We recommend using it within its shelf life and avoiding heat, direct sunlight, and open air exposure.

This thick UV glue is mainly designed for attaching decorations to the surface of DIY projects. If you want to embed dried flowers or other delicate items inside resin, make sure the materials are completely dry.

For thin coating, casting, or resin ring projects, a thinner UV resin may be more suitable. This listing is for thick UV glue, which is better for bonding rhinestones, crystals, pearls, shells, and charms.